|
|
For the fixing of ceramic, homogeneous, mosaic, stone, brick, clay and cement tiles to interior and exterior walls and floors and for repairing and rendering cement-based surfaces. Made in Italy. Complies with BS5980 |
| 1. SURFACE PREPARATION |
SLURRY COAT - Slurry Coat to concrete surface prior to plastering screed. |
||||
| P6 Primer 25 kg, 5 kg |
KERAPLAST 25 kg, 5 kg |
IDROBUILD 24 kg, 8 kg |
||
 |
 |
 |
||
| Technical latex for the preparation of cement-based mortars. Improves compactness, adhesive strength, flexibility and impermeability. | Latex for finishing, levelling and self-levelling products, which improves flexibility, adhesive and mechanical strength. | High-elasticity, waterproofing system applied on concrete before laying covering materials. | ||
| SCREED -
Pre-mixed rapid drying screed |
||||
| KERACEM 25 kg |
KERACEM PRONTO 30 kg |
KERALEVEL LR 25 kg |
||
 |
 |
 |
||
| Add sand on site, walk over in 8 hours. | Just add water floor screed. Walk over in 3 hours | Ready-mix wall render for levelling up to 25 mm. Excellent for laying moisture sensitive marble. | ||
| 2. CEMENT-BASED ADHESIVES |
| SUPER 25 kg |
H40 FLEX 25 kg |
H40 RAPID 25 kg |
||
 |
 |
 |
||
| For laying ceramic tiles on floor and wall up to 10mm thick. Easy to work, high coverage and long open and adjustment time. | SAS technology adhesive with high and deformability for laying ceramic tiling with low water absorbency. | SAS technology adhesive with extra-fast drying and setting for laying stable marble. |
| H40 MAXI 30 kg |
SUPERFLEX 25 kg |
|||
 |
 |
|||
| A special adhesive powder comprising water-based binders and synthetic resins for thick-bed installation (5-15 mm) of ceramic tiles and natural stones. | Two-component, high-elasticity polyurethane system for laying all types of ceramic tiles. Waterproof and good chemical resistance. |
| 3. COLOUR GROUTS |
| FUGABELLA 1-4 25kg / box (5 pcs x 5 kg) |
FUGABELLA 2-12 25kg / box (5 pcs x 5 kg) |
FUGABELLA EPOXY 10 kg, 5 kg |
||
 |
 |
 |
||
| Grout for joints from 1-4 mm. Suitable for grouting joints on floor and wall with all types of ceramic tiles and natural stone. | Grout for joint from 2-12 mm with high resistance to abrasion and reduced water absorption for grouting. | Epoxy system for waterproof grouts with high chemical resistance. |
| 3. SELF-LEVELLING |
KERAPAV R10 - Self-levelling product with ultra-rapid hardening |
|
25 kg |
KERAPAV R10 is used to rectify the dimensions
and flatness of horizontal substrates. A perfectly smooth flat surface free
from gaps and crazing is always obtained. Used universally for indoor
flooring, this product is suitable whenever mechanical strength and loss of
humidity have to be achieved quickly. It ensures a high degree of adhesive strength and high mechanical resistance also in heat-radiant screeds. The excellent self-levelling capacity with both manual and machine application allows for high coverage characteristics also in difficult site conditions. Ideal for floors that have to support heavy, concentrated loads. |
 |
|
|
Unit 2508, 25/F, Tower B, Southmark, 11 Yip Hing Street,
|
|
Fax: (852) 2834- 0677 E-mail: arcoiris@netvigator.com |
|
PHONE US: (852) 2891-4070 |